NEC VT770 manual Equipment Connections and Settings, Software Installation

6.Using Dynamic Image Utility 2.0 on the supplied CD-ROM

￿Equipment Connections and Settings

When Making Connections with Serial Cable

What Can Be Accomplished

•Using Dynamic Image Utility 2.0, a picture or slide can be sent to the projector and then projected to a screen.

•Using the projector control function of Dynamic Image Utility 2.0 allows operations to be performed from the per- sonal computer which include switching the projector power on/off, signal selection, and adjustment of the picture quality.

[For Connections with Serial Cable]

Equipment to Be Prepared

•Projector (This unit)

•Personal computer

•Serial cable not included with the projector (Optional CA03D is available)

Connection at the Projector Side

Plug the serial cable into the PC CONTROL connector. (“Terminal Panel Features” and “PC Control Connector” on pages 16 and 121)

Connection at the Personal Computer Side

Plug the serial cable into the (RS-232C) serial connector.

￿Software Installation

NOTE

•Windows XP operations will be described in examples given here.

•When using Windows 2000, please perform software installation/uninstalling with "Administrators" authority. When using Win- dows XP, perform with "Computer Administrator" authority.

Dynamic Image Utility 2.0 Installation

Dynamic Image Utility 2.0 and Viewer PPT Converter 2.0 will all be installed together. The various programs cannot be installed individually.

Preparation: Start Windows.

If Windows has already been started, please exit all running application software. The installation may not be com- pleted properly unless all software has been exited.

1.Place the supplied CD-ROM in the CD-ROM drive. The "Startup" screen will appear.

Reference

Should the "Startup" screen not appear...

1)Click [Start].

2)Click [Run (R)]. The [Run] screen will appear.

3)Enter the CD-ROM drive name (e.g., "Q: \") and then "SETUP.EXE" to [Open (O)].

4)Click [OK]. The "Startup" screen will appear.

69