Making Calls
Internal Calls
Lift handset
Dial station number or “9” for the attendant (or reception) OR press Feature Access Key or One Touch Key programmed for Direct Station Selection
Voice announce after tone burst or wait for ringing call to be answered.
Note 1: When calling a digital telephone, dialling 1 after the station number will change ringing to voice or voice to ringing.
Note 2: To directly access a personal voice mailbox on the Xen Mail system, dial 7 after dialling the station number.
Outside Calls
Lift handset
Dial trunk access code i.e 0
OR press idle Outside Line Key
Dial telephone number
Converse
Preset Dialling
Dial the desired number
Lift handset
Converse
Last CO/PBX Number Redial
Lift handset
Press Redial
Dial Last Number Redial code #
Converse
Speed Dial- Using The Redial (LNR/SPD) key
Lift handset
Press Redial (LNR/SPD) and dial Speed Dial Memory Location:
Station Speed Dial | |
System Speed Dial |
OR press Feature Access key or One Touch Key programmed for Station Speed Dial
Converse
Speed Dial - Using The Softkeys
Press the SYS. or STA. Softkey ( 
) (System or Station Speed Dial respectively)
Continued next page
4
