NetComm HS960 manual Nat

Item

Default

Description

System/Host Name	Empty	The system name can consist of up to 40 alphanumeric characters.
Domain Name	Empty	The Domain name can consist of up to 80 alphanumeric characters.
Location Information	Empty	Enter your location information.
Item	Default	Description
NAT (Network Address Translation)
NAT	Enable	Enables or disables NAT Address Translation function.
User Session Limited	Enable,30	Enables or disables user session limit function. This feature provides you with
		an ability to control a number of sessions allowed for particulars user(s) at the
		one time.
IP Plug and Play (iPnP	Enable	Enables or disables plug & play function. When enabled, the user needn’t
Technology)		change their network configuration to access the Internet.
Layer 2 Isolation	Enable	If enable plug and play is selected, you can enable Layer 2 Isolation Security
Security		function. When the “Layer 2 Isolation Security” enabled, your users will be unable
		to see each other on the network.
Secure administrator IP	Any	Administrator can specify 5 IP addresses or a range to allow remote control
Addresses		access from network.
Multicast Pass Through	Disable	This function allows for multiple transmissions to specific recipients at same time.
Allow remote user to	Enable	This function allows remote user to ping the HS960 through Internet.
ping the device
SSL Certificate	Default	Option: default or customise certificate. There are two ways to create a
		certificate. The first is to purchase a certificate from a certificate authority and
		another is creating a self-certificate.

Click Apply button, then Restart dialog box will appear. Click Apply to restart the system.

Figure 3-25 Restart Dialog Box

HS960 Wireless Gateway User Guide	YML857 Rev1
38	www.netcomm.com.au