NetComm HS960 manual Web Server Http Port, IP Address Port Number, Https Port 443, Timeout

Item

Default

Description

Web Server

HTTP Port	80	Enter the HTTP port number. The HTTP port allowed range is 80 or 8010 to
		8060. For access HS960 system under NAT, please tab the “http://HTTP Port
		IP Address: Port Number”.
HTTPS Port	443	Enter the HTTPS port number. The HTTPS port allowed range is 443 or 4430
		to 4440. For access the HS960 system, please tab the “https://HTTPS Port IP
		Address: Port Number”.
Administrator Idle-	5 Minutes	The idle time out validity range is 1-1440. If the idle time out is set as 5
Timeout		minutes, it means if the administrator doesn’t send a packet in 5 minutes, the
		administrator will logout automatically.
DHCP Server	Enable	There are three types of DHCP Services.
		DHCP Disable—Disable the DHCP server function.
		DHCP Relay—Enable DHCP Relay function.
		DHCP Server—Enable DHCP server function.
DHCP Relay	To route DHCP through an external server, the administrator needs to enable the DHCP relay and
	assign a valid DHCP server IP address.
DHCP Server IP	Empty	Enter the IP address of DHCP server.
Address
DHCP Server	The HS960 ‘s DHCP server is turned on and running by default when you install it in your
	network.
DHCP Pool Starting	10.59.1.2	Enter the DHCP Pool Starting IP address.
Address
Pool Size	253	The DHCP pool size range is 1 to 512.
Lease Time	300 Minutes	The DHCP lease time. The DHCP lease time range is 1 to 71582788 minutes.
Primary DNS Server	168.95.1.1	Enter the IP address of the network’s primary DNS server.
Secondary DNS Server	Empty	Enter the IP address of a second DNS server on the network.
Email Server Redirect	The HS960 provides an extra email server parameter to forward the subscriber’s email. The
	HS960 not only forwards the subscribers’ E-mail via other E-mail server but also changes the
	SMTP header. The recipient of your E-mail sees the message as if you sent it from your local
	Internet Service Provider.
	Note: Before setting this sever, please make sure the e-mail sever relay function is opened. It must not exceed
	50 characters.
IP Address or Domain	Empty	Enter the E-mail server IP address or domain name.
Name
SMTP Port	25	Enter the SMTP port number for mail server. The SMTP port allowed range is
		25 or 2500 to 2599.

YML857 Rev1	HS960 Wireless Gateway User Guide
www.netcomm.com.au	5