NetComm NB5 Computer Hardware Configuration, Windows XP PCs, Windows 2000 PCs, Windows Me PCs

Computer Hardware Configuration

This section provides instructions for configuring the TCP/IP (Network) settings on your computer to work with your Modem. These steps are only required if you are having trouble accessing your Modem.

Windows® XP PCs

1.In the Windows task bar, click the Start button, and then click Control Panel.

2.Click on Network & Internet Connections icon. (Category mode only).

3.Click the Network Connections icon.

4.In the LAN or High-Speed Internet window, right-click on the icon corresponding to your network interface card (NIC) and select Properties. (Often, this icon is labelled Local Area Connection).

5.The Local Area Connection dialog box displays with a list of currently installed network items. Ensure that the check box to the left of the item labelled Internet Protocol (TCP/ IP) is checked. Select Internet Protocol TCP/IP and click on Properties.

6.In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labelled Obtain an IP address automatically. Also click the radio button labelled Obtain DNS server address automatically.

7.Click OK twice to confirm your changes, and close the Control Panel.

Windows 2000 PCs

First, check for the IP protocol and, if necessary, install it:

1.In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.

2.Double-click the Network and Dial-up Connections icon.

3.In the Network and Dial-up Connections window, right-click the Local Area Connec- tion icon, and then select Properties.

4.In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click Properties

5.In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labelled Obtain an IP address automatically. Also click the radio button labelled Obtain DNS server address automatically.

6.Click OK twice to confirm and save your changes, and then close the Control Panel.

Windows Me PCs

1.In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.

2.Click on View All Control Panel Options.

3.Double-click the Network icon.

4.The Network Properties dialog box displays with a list of currently installed network components. If the list includes Internet Protocol (TCP/IP), then the protocol has already been enabled. Skip to step 10.

5.If Internet Protocol (TCP/IP) does not display as an installed component, click Add…

NB5 Quick Start Guide	YML763Rev216
www.netcomm.com.au