Configuring your NB5

You will need to log directly into the conﬁguration page of the modem and conﬁgure the basic settings for your Internet connection. Your ISP should provide you with the necessary information to complete this step.

The settings that you most likely need to change to access the Internet are grouped onto a single EasyConﬁg page.

To conﬁgure your modem follow the steps below:

Note:	Ensure that your PC is setup as a DHCP client. Refer to the Computer Hardware
	Configuration section for instructions on how to set this up with different Operat-
	ing Systems.

1.Insert the CD into your CD-ROM drive. An autorun screen will appear. Click on Conﬁg- ure Modem.

(Alternatively, if the CD-ROM is not available, you can open a web browser and type http://192.168.1.1 in the location bar to access the modem’s EasyConﬁg setup screen directly.)

2.The login page will be displayed. Enter the modem’s username and password.

The default username is admin. The default password is admin.

Click on Log In.

3. The EasyConﬁg page will be displayed.

NB5 Quick Start Guide	YML763Rev214
www.netcomm.com.au

NetComm manual Configuring your NB5

Models: NB5

Configuring your NB5