Switching LAN technology is a marked improvement over the previous generation of network bridges, which were characterized by higher latencies. Routers have also been used to segment local area networks, but the cost of a router, the setup and maintenance required make routers relatively impractical. Today switches are an ideal solution to most kinds of local area network congestion problems.
Features
The ProSwitch is designed for easy installation and high performance in an environment where traffic on the network and the number of user increase continuously.
The ProSwitch with its rack size is specifically designed for middle to large workgroups. The Switch provides immediate access to a rapidly growing network through a wide range of user- reliable functions.
The ProSwitch is ideal for deployment with multiple
The ProSwitch is expandable by cascading two or more switches together. As all ports support 200Mbps, the Switch can be cascaded from any port and to any number of switches.
The ProSwitch is a perfect choice for site planning to upgrade to Fast Ethernet in the future. Ethernet workgroups can connect to the Switch now, and change adapters and hubs anytime later without needing to change the Switch or reconfigure the network.
The ProSwitch combine dynamic memory allocation with
The ProSwitch is an unmanaged 10/100 Fast Ethernet Switch that offers solutions in accelerating small Ethernet workgroup bandwidth. Other key features are:
■
■Support
■Supports
■Wire speed reception and transmission
■
■Integrated address
■Supports 512Kbytes RAM for data buffering
■
■Broadcast storm protection
■IEEE 802.3x flow control for
■Back pressure flow control for
■Standard 19"
Rev.1 - YML623 | www.netcomm.com.au |
Page 5 |
