NetComm V800, V400 V440 - 4FXS ports + 4 LAN, V404 - 4 FXO ports + 4 LAN, V880 - 8 FXS + 4 LAN

V400 Series - 4 port

V440 – 4FXS ports + 4 LAN V404 – 4 FXO ports + 4 LAN V422 – 2FXS + 2FXO ports + 4 LAN V431 – 3FXS+1 FXO ports + 4 LAN

V800 Series - 8 port

V880 – 8 FXS + 4 LAN V844 – 4 FXS + 4 FXO + 4 LAN V808 – 8 FXO + 4 LAN

TECHNICAL SPECIFICATIONS

WAN

•One 10/100Mbps auto-negotiation, autocrossover RJ-45 Ethernet port

•Support static IP, PPPoE, Bigpond Cable and DHCP address assignment and dynamic DNS (DDNS)

•QoS: IP TOS (Type of Services) and DiffServ (Differentiated Services) for both SIP signalling and RTP

•NAT Traversal: Port Forwarding, STUN, UPnP and Outbound Proxy

•NTP: (Network Time Protocol RFC 1305), Accepts up to 3 Time Servers for redundancy

•Time Zone Support

•MAC Address Clone

•RTP Packet Summary: packets sent, packets received, packet loss - for voice quality analysis

LAN

•Four 10/100Mbps auto-negotiation, autocrossover RJ 45 Ethernet ports

•Supports router and bridge mode (NAT mode and Non-NAT mode)

•DHCP server

•800 Series: module for 802.11x Wireless LAN (for future release)

ADVANCED FIREWALL AND DENIAL OF SERVICE (DOS) PROTECTION

•NAT (Network Address Translation) and PAT (Port Address Translation)

•DMZ, Virtual Server & Port Forwarding

•Traffic Filtering based on MAC address, IP address, TCP/UDP Port number and URL string pattern

•Prevents attacks based on TCP, UDP, IP and ICMP protocols

•Prevents attacks such as SYN Flood, IP Spoofing, Ping of Death, Tear Drop, etc.

PORT CONFIGURATION

400SERIES:

•V404 – 0FXS/4FXO, 1WAN, 4LAN

•V422 – 2FXS/2FXO, 1WAN, 4LAN

•V431 – 3FXS/1FXO, 1WAN, 4LAN

•V440 – 4FXS/0FXO, 1WAN, 4LAN

800SERIES:

•V808 – 0FXS/8FXO, 1WAN, 4LAN

•V844 – 4FXS/4FXO, 1WAN, 4LAN

•V880 – 8FXS/0FXO, 1WAN, 4LAN

LED INDICATORS

•400 Series - Front Panel LED: LAN ports 1~4, WAN, Voice ports 1~4, Alarm, Run, Power

•800 Series – Front Panel LED: Voice ports 1~8, LAN ports 1~4, WAN, WLAN, Alarm, Run, Power

GENERAL SPECIFICATIONS

•Power Adaptor: AC 100V~240V 50/60Hz input, DC 12V output

•Temperature Operation 0 °C ~ 45 °C

•Storage -25 °C ~ 75 °C

•Humidity up to 90% RH, non-condensing 400 SERIES:

•Dimension (W/D/H) all models: 202 x 172 x 35 mm

•Weight all models: 0.43kg 800 SERIES:

•Dimension (W/D/H) all models: 302 x 179 x 45 mm

•Weight all models: 1.2kg

VOICE FEATURES

•SIP (RFC3261) compatible

•Voice codecs: G.711 a/μlaw, G.726, G.729A, G.723.1

•CNG (Comfort Noise Generation)

•VAD (Voice Activity Detection)

•Silence suppression/detection

•G.165/G.168 echo cancellation

•Adjustable Jitter Buffer and programmable Gain Control

•Fax Support: T.30 (G.III)/Real time T.38/ Secured T.38 FAX relay

•In-Band DTMF, Out-Of-Band DTMF relay (RFC2833, SIP INFO)

•Multiple SIP Proxy server entries (same provider) with failover mechanism**

•Polarity reversal detection (FXO/PSTN) and generation (FXS)

•DTMF, FSK (Bellcore & ETSI) Caller ID detection and generation.

•Support Caller ID Restriction (CLIR)

•FXO hang up detection: Busy Tone cadence auto learning/ detection*

•Support PSTN-to-VoIP (transit in) / VoIP-to- PSTN (transit out) applications*

•Call control for transit-in/transit-out with self-defined security privileges

•Recordable greeting message for transit-in calls

•Digit Map for dialling plan support and call barring

•Speed Dial

•Local phone book for peer-to-peer calling

•E.164 Numbering & ENUM support

•Hot-Line, Warm-Line support

•Single Number / Account (representative number) for multiple ports

•Group Hunting function

•Dual Network Support Proprietary server and protocol enables small businesses to build private SmartVoice network and use standard SIP network at the same time

•Supplementary call features:**

•Call Hold, Call Waiting, Call Pickup

•Call Forward - Unconditional, Busy, No Answer

•Call Transfer - Unattended, Attended

•Three Way Calling (Media Server required)

•Failover mechanism (FXS relay to FXO/PSTN):

•Network failure

•Service unavailable

•Power loss

•Analogue interface

•Connector: RJ-11

•Signalling protocol: Loop Start

CONFIGURATION & MANAGEMENT

•Configuration methods:

•Web Browser

•IVR

•Telnet

•Status reports:

•Port status

•Registration status

•Ping tests

•STUN/UPnP status

•Hardware/software information

•Firmware Upgrade through TFTP, FTP and proprietary image server

•Configuration Backup/Restore

•Reset button (with restore factory default function)

•Optional Auto Provisioning Server (APS) for mass deployment

•SNMP V1 / V2c (optional)

* Features are only applicable in models which have an FXO port(s) ** The availability of these features may depend on your service provider’s network

YOUR NETCOMM DEALER

netcomm limited abn 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia

P: 02 9424 2070 F: 02 9424 2010

E: sales@netcomm.com.au W: www.netcomm.com.au

Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product