Display the Routing Table

Wireless Cable Modem Gateway CG814WG v3 Reference Manual

Display the Routing Table

This operation will display the internal routing table. This information is used by Technical Support and other staff who understand Routing Tables.

Reboot the Router

Use this button to perform a remote reboot (restart). You can use this if the Router seems to have become unstable or is not operating normally.

Note: Rebooting will break any existing connections either to the router or through the Reboot the Router router. However, connections to the Internet will automatically be re-established

when possible.

Remote Management Access

With Remote Management, you can allow a user or users on the Internet to configure, upgrade and check the status of your CG814WG v3 Gateway.

To configure your gateway for Remote Management:

1. Click Remote Management to go to this screen:

Figure 4-12

2.Select the Allow Remote Management check box.

3.Specify the port number that will be used for accessing the management interface.

Managing Your Network

4-11

v1.0, June 2007

Page 49
Image 49
NETGEAR CG814WG V3 manual Remote Management Access, Display the Routing Table, Reboot the Router