Wireless Cable Modem Gateway CG814WG v3 Reference Manual
Note: If you cannot connect to the gateway, see “Basic Functions” in Chapter 5.
When you connect to the gateway the Gateway status screen opens.
Figure
4.Enter your Network Configuration.
•WAN IP Address: The IP Address that you would for your gateway in dotted decimal notation.
•WAN Subnet Mask: The network number portion of an IP address. Unless you are implementing subnetting, use 255.255.0.0 as the subnet mask.
•WAN Default Gateway: This is the ISP’s router to which your gateway will connect.
•WAN Primary and Secondary DNS: A DNS server is a host on the Internet that translates Internet names (such as www.netgear.com) to numeric IP addresses. Typically your ISP transfers the IP address of one or two DNS servers to your gateway during login. If the ISP does not transfer an address, you must obtain it from the ISP and enter it manually here. If you enter an address here, you should reboot your PCs after configuring the gateway.
5.Click Apply to save your settings.
For more information about the Gateway Status screen see“Gateway Status” in Chapter 4.
Connecting the Gateway to the Internet |
v1.0, June 2007
