Cableusb

Use the Ethernet cable if you’re connecting the modem to one or more computers and you have an available RJ-45 port on your computer.

1.Connect the CATV cable from the wall outlet to the Cable port on the modem.

2.Connect the Ethernet cable to the RJ-45 port on the computer and to the Ethernet port on the modem.

3.Connect the power adapter into the back of the modem and then plug the adapter into a power source (such as a wall socket or power strip).

	RESET
POWER	12VDC 1.0A-1.25A

ETHERNET

CM212 Broadband

Cable Modem

4.If the computer was turned off, turn it on now.

The Power, Cable, Status, and Ethernet lights on the modem should be lit. If any of the lights are not light, go to Troubleshooting on page 13.

Note: If you plan on sharing your cable Internet Service among multiple PCs, refer to section 5 of this Guide.

NETGEAR CM212 manual Cableusb