Model FA310TX Network Card Installation Guide
Instructions in this guide are for users of Windows® 95 who are installing the
Model FA310TX Network Card. For instructions on installing and verifying the
Windows 95 network driver, refer to “Install the Windows 95 Network Driver”
on the other side of this guide.
These three easy steps are provided in this guide for installing your Model
FA310TX Network Card:
1. Verify Package Contents
2. Install the Network Card
3. Connect the Network Cables
As a last step, be sure to register your NETGEAR product.
Note: If you are using other network operating systems: Insert the
Drivers and Diagnostics Disk in Drive A, type the command
A:\HELP, press [Enter] to execute the progr am, pr ess [Enter] again to
pass the opening screen, select the name of the operating system,
press [Enter], and then follow the instructions on the screen.
Start Here