Expanded Workgroup
Both the Model FS2105 Fast Ethernet Switch and the Model FS2108 Fast Ethernet Switch can be used to connect multiple PC workgroups.
Model FS2108 Switch
Uplink
110V 3A MAX
|
|
|
|
|
|
|
|
|
|
|
Uplink | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | PWR | |
Uplink
Model EN2005 | Model DS108 |
10 Mbps Hub | 10/100 Mbps Hub |
|
|
|
|
|
| 7.5 1A | DUAL SPEED |
5 | 4 | 3 | 2 | 1 | PWR |
|
9609FA
Installing the Switch
There are three ways to install either the Model FS2105 Fast Ethernet Switch or the Model FS2108 Fast Ethernet Switch:
•Desktop
•Magnetic mount (see “Inserting the Magnet ”)
•Wall mount
You do not need tools for desktop or magnetic mount installation, but you do need a Phillips screwdriver for wall mount installation.
Wall Mounting the Switch
1.Measure the distance between the mounting holes on the back of the switch.
2.Mark the wall to match the location of the mounting holes.
3.At the marked location, insert the two screws that you received in your package contents.
Note: For all three installations:
•Choose a location that is near the devices to be connected.
•Make sure you are close to an electrical outlet.
•Be sure to leave at least 2 inches of space all around the switch for ventilation.
Model FS2105/FS2108 Fast Ethernet Switch Installation Guide
