NETGEAR FS2105 Introduction, Product Illustration, LEDs, The NETGEARand, Label, Color, Activity

Model FS2105 Fast Ethernet Switch

Model FS2108 Fast Ethernet

Introduction

The NETGEAR™and

Switch simplify 10/100 megabits per second (Mbps) switching technology so that small businesses can enjoy the same high-performance networking facilities that the corporate users enjoy. These switches boost network throughput, while preserving your investment, so that there is no need to replace installed cabling, desktop software, or hardware.

Product Illustration

Front Panel of the Model FS2108 Switch

Link/Activity LEDs

									LINK/ACT
PWR	1	2	3	4	5	6	7	8
8 Port									100M
FAST ETHERNET SWITCH
MODEL FS2108									FDX

Rear Panel of the Model FS2108 Switch

10/100 Network ports

110V 3A MAX

Uplink 8 7 6 5 4 3 2 1 PWR

	Port 8 Normal	Power
Port 8 Uplink		input

100M LEDs FDX LEDs

9608FA

Note: The Model FS2105 Fast Ethernet Switch is similar to the Model FS2108 Fast Ethernet Switch, with the exception of three fewer RJ-45 ports and LEDs.

LEDs

This table describes the activity for LEDs on either the Model FS2105 switch or the Model FS2108 switch.

Label	Color	Activity	Description
Pwr	Green	On	Power is supplied to the switch.
(power)		Off	Power is disconnected.
Link/	Green	On	Port connection is good.
ACT		Blinking	This port is receiving or transmitting data.
100M	Green	On	This port is operating at 100 Mbps.
		Off	This port is operating at 10 Mbps.
FDX	Green	On	The port is operating in full-duplex mode.
		Off	The port is operating in half-duplex mode.

Model FS2105/FS2108 Fast Ethernet Switch Installation Guide