Front Panel of the Model FS750 Switch
| | | 10/100 Mbps | | | | |
| | | | ports | Module Bays |
Link LEDs | Mode LEDs | | | | | | |
| | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
Power
LED
LED Mode | Reset |
Button | Button |
Rear Panel of the Model FS750 Switch
Figure 2-2. Front and Back Panels of the FS750 Switch
10/100 Mbps RJ-45 Ports
As Figures 2-1 and 2-2 show, the FS726 Switch has 24 RJ-45 ports, while the FS750 Switch has 48 RJ-45 ports. These are auto-sensing 10/100 Mbps ports: when you insert a cable into an RJ-45 port, the switch automatically detects the maximum speed (10 or 100 Mbps) and duplex mode (half- or full-duplex) of the attached device, and displays this information using the front panel 100 Mbps and FDX LEDs for that port (LEDs are described in the next section). The 10/100 Mbps ports support only unshield- ed twisted-pair (UTP) cable terminated with an 8-pin RJ-45 plug.
