CHAPTER 5: TROUBLESHOOTING
This chapter provides guidance in troubleshooting the NETGEAR FS726 and FS750 Switches. Information includes:
•Troubleshooting information table
•Additional troubleshooting suggestions
Troubleshooting Chart
Table 5-1 lists symptoms, causes, and solutions of possible problems.
Table |
| |
|
|
|
Symptom | Cause | Solution |
Power LED is off. | No power is received | Check the power cord connections |
|
| for the switch at the switch. and the |
|
| connected device. |
|
| Make sure all cables used are |
|
| correct and comply with Ethernet |
|
| specifications. |
|
|
|
Link LED is off | Port connection is not working | Check the crimp on the connectors |
or intermittnet. |
| and make sure that the plug is |
|
| properly inserted and locked into the |
|
| port at both the switch and the |
|
| connecting device. |
|
| Make sure all cables used are |
|
| correct and comply with Ethernet |
|
| specifications. See Appendix C. |
|
| Check for a defective adapter card, |
|
| cable, or port by testing them in an |
|
| alternate environment where all |
|
| products are functioning. |
|
|
|
