NETGEAR FSM7352S manual LED Descriptions, Console Port, Label Description

LED Descriptions

The front panel of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch has LEDs that provide a quick and accurate display of port speed, activity, and link state. The Gigabit Ethernet SFP ports also have LEDs that show link and activity status. Table 2-1 summarizes the LEDs on the switch and Gigabit Ethernet module.

Table 2-1. Front Panel LEDs:

Label	Description
Power	Solid Green- Power is supplied to the switch & operating normally
	Blinking Green- Runtime code load in progress
	Solid Yellow- POST in progress.
	Blinking Yellow- POST fail or CPU fail.
	Off- Power is Disconnected.
Fan	Solid Red- Fan has failed
	Off- Fan is present and operating normally
Status	Green on- Switch is operating normally
	Amber on- Switch has failed to bootup
Master	Green on – Switch is the master of the stack
	Amber on – Switch is not the master of the stack
	Off – Swicth is not part of a stack
48-10/100M Ports	Link/ACT/SPD LED:
One LED /Port	• OFF- No 10/100Mbps link is established on the port.
	• Solid Green- A valid 100Mbps link is established on the port.
	• Blinking Green- Packets transmission or reception is occurring on the
	port at 100Mbps.
	• Solid Yellow- A valid 10Mbps link is established on the port.
	• Blinking Yellow- Packets transmission or reception is occurring on the
	port at 10Mbps.
4-10/100/1000M Ports	Link/ACT LED:
Three LED / Port	• OFF- No 10/100/1000Mbps link is established on the port.
	• Solid Green- A valid 1000Mbps link is established on the port.
	• Solid Yellow- A valid 10/100Mbps link is established on the port.
	• Blinking Green- Packets transmission or reception is occurring on the
	port at 1000Mbps.
	• Blinking Yellow- Packets transmission or reception is occurring on the
	port at 10/100Mbps.
	Stack LED :
	• Green- Stack port has a valid link connection.
	• OFF- Stack port does not have a valid link connection
SFP Port (1000M bps only)	• Solid Green- Link up
	• Blink Green- Activity, transmitting or receiving packet in link up status
	• Off- No Link detected

Console Port

Your NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch has a console port on the front panel. This port is labeled Console and is required for initial management configuration of the switch. It also lets you manage the switch using a directly connected VT-100 terminal, personal computer (PC), Apple Macintosh, or UNIX workstation. The terminal, computer, or workstation connects to the console port using the null-modem cable supplied with your switch.

Page 11 of 24