Reference Manual for the MR814v2 Cable/DSL Wireless Router

 

 

 

 

 

Table 1-1.

LED Descriptions

 

 

 

 

 

 

 

On

Indicates that the Wireless port is initialized.

 

Wireless

 

 

 

 

 

 

 

 

 

 

On (Green)

The Local (LAN) port has detected link with a 100 Mbps device.

 

 

 

Blink (Green)

Data is being transmitted or received at 100 Mbps.

 

 

 

On (Amber)

The Local port has detected link with a 10 Mbps device.

 

 

 

Blink (Amber)

Data is being transmitted or received at 10 Mbps.

 

 

 

 

Local

Off

No link is detected on this port.

 

 

 

 

 

 

 

 

 

The Router’s Rear Panel

The rear panel of the Model RP614 router contains the port connections listed below.

Figure 1-2: MR814v2 Rear Panel

Viewed from left to right, the rear panel contains the following features:

AC power adapter outlet

Four Local (LAN) Ethernet ports for connecting the router to the local PCs

Internet (WAN) Ethernet port for connecting the router to a cable or DSL modem

Factory Default Reset push button

Wireless antenna

Introduction

1-7

Page 19
Image 19
NETGEAR manual Router’s Rear Panel, MR814v2 Rear Panel