Reference Manual for the MR814v2 Cable/DSL Wireless Router

Connecting the MR814v2 to Your LAN

This section provides instructions for connecting the MR814v2 router. Also, the MR814v2 Resource CD included with your router contains an animated Installation Assistant to help you through this procedure.

Procedure: Connecting the Router

There are three steps to connecting your router:

1.Connect the router to your network

2.Log in to the router

3.Connect to the Internet

Follow the steps below to connect your router to your network. You can also refer to the Resource CD included with your router which contains an animated Installation Assistant to help you through this procedure.

1.Connect the router to your network.

a.Turn off your computer and Cable or DSL Modem.

b.Disconnect the Ethernet cable (A) from your computer which connects to your cable or DSL modem.

A

Cable or DSL modem

Figure 2-1: Disconnect the cable or DSL Modem

 

 

 

2-4

Connecting the Router to the Internet

Page 24
Image 24
NETGEAR manual Connecting the MR814v2 to Your LAN, Procedure Connecting the Router