ReadyNAS Desktop Storage Systems
Status Information
You can obtain information about the status of your unit by reviewing the indicators listed in the following table.
Item | Description |
|
|
Power button and LED | Press this button to turn on the ReadyNAS. The LED has these states: |
| • Blinking. Booting |
| • Blue. Powered on |
| • Off. Powered off |
|
|
Disk LEDs (1, 2, 3, 4) | Each disk bay has an LED associated with it, in numerical order from left to right, |
| along the top of the front panel of the unit. The disk LEDs have these states: |
| • On. Power is on and the disk is operating normally. |
| • Blinking. The disk failed or is resynchronizing. See the status display screen |
| for details. |
| • Off. The disk bay is empty. |
|
|
Disk activity LED | The disk activity LED has these states: |
| • Blinking green. A disk is active. |
| • Off. No disks are active. |
|
|
Rear panel Ethernet port | Two LED status indicators are built into these ports. One LED indicates port |
LEDs | activity. The other LED indicates connection speed as follows: |
| • Green. The port is operating at 1,000 Mbps. |
| • Amber. The port is operating at 100 Mbps. |
| • Off. The port is operating at 10 Mbps. |
|
|
Status display screen | Displays messages about the status of your unit. Note that the status display |
| screen goes to sleep to prevent |
| unit reports an abnormal operation or error, the status display screen stays on. |
|
|
20
