NETGEAR WGE111 user manual Viewing the Wireless Networks Available, Configuring the IP Settings

User Manual for the NETGEAR WGE111 Wireless Game Adapter

4.The default Channel/Frequency is set to Auto. It should not be necessary to set the wireless channel unless you notice interference problems with another nearby access point.

5.Select the Wireless Security option to match the Access Point; the screen will change according to the option selected.

•Disable — no data encryption.

•WEP (Wired Equivalent Privacy) — use WEP 64 or 128 bit data encryption. See “Using WEP Security Encryption” on page 4-6for more information.

6.Click Apply.

Viewing the Wireless Networks Available

This Wireless Networks Available screen shows the wireless networks that the WGE111 Wireless Game Adapter detects.

Figure 4-4: Wireless Networks Available

The Network Name (SSID), Channel, Security, Signal Strength, MAC (Media Access Control) address and Access Point network mode for each network are displayed.

Click Scan to search for the wireless networks available. Click Refresh to update the results.

Configuring the IP Settings

The TCP/IP configuration screen is used to configure the IP address of the Wireless Game Adapter. The figure below shows the TCP/IP configuration screen.

Web Configuration 4-9