Getting Started
5
Universal WiFi Range Extender WN3000RP
Hardware FeaturesWPS
Ethernet port
Factory Reset button
WPS button
Device On/Off button
PC to Extender Status
Link Rate
Note: For best performance,
position antennas pointing up.
Figure 1. Extender
The LEDs on the front show how the Extender is working:
• WPS. This LED indicates a WPS wireless connection.
-Solid green. There is wireless security (WPA or WPA2).
-Blinking green. A WPS connection is in progress.
• PC to Extender. The LED is lit when the Extender is connected to a PC.
• Status. This LED is lit when the Extender is powered on.
• Link Rate. This LED indicates a wireless connection between the Extender and the
router.
-Green is best.
-Amber is good.
-Red is poor.
The side panel has the following features:
• Ethernet port. You can use this for a wired connection to a computer or other device as
described in the User Manual.
• Factory Reset button. To use this button, stick a paper clip into the reset hole and hold it
until the Status LED flashes.
• WPS button. Press the WPS button to wirelessly connect the Extender to your
router or wireless adapter.
• Device On/Off button. Turns the device on and off.