NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
1-4 Introduction
v1.0, September 2008
You can use the status lights on the front of the wireless access point to verify various conditions
described in the following table:
.
Figure 1-1 Front panel status LEDs
Table1-1. Port and system LEDs
Feature Detailed Description
LAN Port LED Link/Act
Green – Giga Ethernet link is properly made
Amber – Fast Ethernet link is properly made
Sparkle – Active
Off – No Link is detected
WLAN LED Wireless Link/Act
Green– A 802.11n WLAN link is properly made
Sparkle – Network activity is occurring
Off – No Link is detected
Power/Diag Green – Power is on
Amber – System is booting up
Sparkle Amber – Firmware is upgrading
Off – Power is off
P
Power
LAN
WLAN