NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
3-14 Wireless Security Settings
v1.0, September 2008
2. From the Network Authentication drop-down menu, select WPA2-PSK from the list. By
default, Data Encryption will be set to TKIP+AES. (see Figure 3-7)
3. Enter the preshared key passphrase (Network Key).
4. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations).
5. Click Apply to save your settings.
Configuring WPA-PSK and WPA2-PSK
Not all wireless adapters support WPA and WPA2. Client software is required on the client:
• Vista, Windows XP and Windows 2000 with Service Pack 3 or higher do include the client
software that supports WPA. The wireless adapter hardware and driver must also support
WPA.
• Service Pack 3 does not include the client software that supports WPA2. Make sure your client
card supports WPA2. The wireless adapter hardware and driver must also support WPA2.
Consult the product documentation for your wireless adapter; WPA client software for instructions
on configuring WPA settings; and WPA2 client software for instructions on configuring WPA2
settings.
Figure 3-8 WPA-PSK and WPA2-PSK security settings