Setting Up WEP Encryption Security | NETGEAR WNA1100-100ENS instruction

Wireless-N 150 USB Adapter WNA1100v1 User Manual

c.In the Security section, select WPA-PSK [TKIP] or WPA2-PSK [AES], and enter the passphrase.

Figure 2-10

For more about WPA2-PSK, click the link to “Wireless Networking Basics” in Appendix B.

3.Save your settings in a profile.

a.Click the Save Profile button. All the configuration settings are saved in this profile.

b.Click Apply, and then click Close to exit the Smart Wizard.

Setting Up WEP Encryption Security

To configure WEP encryption security:

1.Run the WNA1100 v1 Smart Wizard.

a.Make sure that the wireless-N USB adapter is connected to the USB port in your computer.

b.Use the icon to open the Smart Wizard. The Settings tab displays.

2.Configure the security settings.

a.In the Profile field, select the profile, or type in a profile name.

2-11

v1.0, December 2009

Image 31

NETGEAR WNA1100-100ENS user manual Setting Up WEP Encryption Security

Contents

NETGEAR, Inc Wireless-N 150 USB Adapter WNA1100v1 User Manual FCC Statement Technical Support RF Exposure Information FCC RF Radiation Exposure and SAR StatementsIndustry Canada Statement SAR Statement Product and Publication Details Contents Appendix B Related Documents Conventions, Formats, and Scope About This Manual Revision History What You Need Before You Begin Chapter Installation with Custom Setup Observe Wireless Location and Range Guidelines Installation with Custom SetupFirst, Install the WNA1100v1 Software V1.0, December Then, Install Your WNA1100 v1 Adapter V1.0, December V1.0, December Monitoring Wireless Network and the Internet Connections Color Condition Description WNA1100 v1 Icon Understanding the Status Bar Smart Wizard Status Bar Removing the WNA1100 v1 Software Wireless-N USB Adapter LEDMeaning Upgrading the WNA1100 v1 Software V1.0, December Viewing Wireless Networks in Your Area Network Connections and Wireless Security Network Tab Joining a NetworkField or Button Description List of networks displays Using Push N Connect to Join a Network Creating a Profile to Connect to a Wireless Network Click Save Profile Managing Profiles Setting Up a Computer-to-Computer Ad Hoc Profile Select Computer-to-Computer Ad Hoc for the network type Select the Computer-to-Computer Ad Hoc network type Starting a Computer-to-Computer Ad Hoc Network Connection WEP. See Setting Up WEP Encryption Security on About Wireless Security Setting Up WPA-PSK Tkip or WPA2-PSK AES Security Wireless Network Name Ssid and Security Settings Setting Up WEP Encryption Security V1.0, December Statistics Descriptions Monitoring StatisticsLabel Description About Your Smart Wizard About Tab SettingsAbout Tab Field Description Auto Check Advanced SettingsGet Info button Check button V1.0, December Optimizing Wireless Performance Wireless Network Performance Optimizing Your Network Bandwidth Broadband Internet Small Office and Home Office Soho Networking Technologies Assessing Your Network Speed Requirements Wireless Network Connection Theoretical Raw Transfer Time Theoretical Transfer Time for 1 Gigabyte Troubleshooting Tips Troubleshooting Connection Status Shows Troubleshooting Your Wireless Connection Problem Action Occasional Windows XP Connection Problems Ad Hoc Mode Is Not Working Correctly FCC, CE Technical Specifications Feature Description Factory Default Settings Document Link Appendix B Related Documents