Installation Guide
N600 Wireless Dual Band Gigabit Router
WNDR3700v4
Package Contents
Step 1:
Unplug the power
to turn off your modem.
Step 2:
Connect one end of the yellow Ethernet cable to your modem, and the other end to the Internet port on your router.
(not included)
Laptop or desktop computer
Step 5:
Connect your computer to the router
Ethernet cable
N600 Wireless Router | Power adapter |
|
DSL or cable
Internet
Power On/Off
Modem
Step 3:
Plug in the power to turn on your modem.
Wait approximately 2 minutes until your modem turns on.
If your modem has a battery backup,
first remove and reinsert
the battery before connecting your modem to power.
Power On/Off
N600 Wireless Router
Step 4:
Connect the power adapter to the router, then plug it into an outlet.
Wait for the 2.4 GHz LED ( 2.4 GHz ) to light.
If none of the LEDs light, make sure that the Power On/Off button is in the on position (pushed in).
Use another Ethernet cable to establish a wired connection as shown in this diagram.
Optionally, connect wirelessly by using the preset wireless security settings, located on the bottom label.
Step 6:
Open a browser.
If the web page does not display, close and