XE104 User Guide
1.First, connect a XE104 Wall-Plugged Ethernet Switch to a LAN port on the router so that the PowerLine network can gain access to the internet.
WARNING!
Figure 3-3
Do not connect the XE104 85 Mbps Wall-Plugged Ethernet Switch to a power strip, extension cord, or surge protector as this may prevent them from working properly or degrade the network performance.
a.Plug the blue Ethernet cable that came in the box into a LAN port on your router or switch in your network.
Figure 3-4
b.Plug the XE104 into an electrical outlet near the router.
Installing the XE104 Wall-Plugged Ethernet Switch | 3-3 |
v1.0, September 2005
