Netopia D3100-I IDSL, D3232 IDSL, D7100 SDSL, D7171 SDSL - page 18

2-18 User’s Reference Guide
NN
NNee eett ttoo oopp ppiiii aa aa DD DD-- --SS SSee eerr rriiii ee eess ss DD DDSS SSLL LL DD DDSS SSUU UU ss ss tt ttaa aatt ttuu uuss ss llll iiiigg gghh hhtt ttss ss
The figure below represents the Netopia D-Series status light (LED) panel.
Netopia D-Series LED front panel
The following table summarizes the meaning of the various LED states and colors:
8-port Ethernet hub Eight 10Base-T Ethernet jacks. You will use one of these to configure the
Netopia D-Series. For a new installation, use the Ethernet connection.
Alternatively, you can use the console connection to run console-based
management using a direct serial connection. You can either connect your
computer directly to any of the Ethernet ports on the Netopia D-Series, or
connect both your computer and the Netopia D-Series to an existing Ethernet
hub on your LAN.
When this happens... the LEDs...
The corresponding line passes supervisory traf fic between
the Digital Subscriber Line Access Multiplexer (DSLAM) and
the Netopia D-Series
2 or 8 flashes yellow .
The WAN interface is operational 3 or 9 is green .
The line is unavailable 3 or 9 flashes red .
The WAN on Channel 1 has carrier 4 or 10 is green .
Data is transmitted or received on the WAN on Channel 1 4 or 10 flashes yellow .
The WAN on Channel 2 has carrier 5 or 11 is green . (D3232 only)
Port Description
2 3 4 5 6 7 8 9 10 11 12 13 1415 16 171819 20 21
Management
Ready
Channel 1
Link/Receive
Console
Auxiliary
Collision
Traffic
WAN 1 WAN 2 Ethernet
Power
1
Channel 2
Management
Ready
Channel 1 Channel 2