4
❏Installs X servers; server modules containing local clients,
extensions, libraries, and protocols; host system executables
and fonts; color database; X keysym database; and
configuration files (listed in theRelease Notes).
❏Starts the license management software and adds startup
commands to the host startup files.
❏Configures terminals on the network, updating network and
host databases to include required addressing information. On
UNIX systems,ncdinstall saves the original network and host
database files with the extension_O.
Preparing to Configure Terminals Using
ncdinstallBefore you installNCDware and configure your terminals, you
need:
❏A host system with access to aCD-ROM drive.
❏Super-user access privileges.
❏Approximately 10 minutes to installNCDware.
❏Terminals set up and attached to the network (see terminal
installation booklets for instructions).
❏An empty directory. During installation certain files are
installed in this directory.
❏Information about the terminals you will be adding to the
network. Set up a table that lists the following information for
each terminal before you start the installation program.