Network Computing Devices GW-EN11H user manual Wireless Navigator Installation

GeoWave GW-EN11H Wireless Ethernet Adapter User's Manual

3. Wireless Navigator Installation

Install the Wireless Navigator

The Wireless Navigator Utility is provided to allow user easily to configure the adapter through any Windows-based PC. This section describes procedures for installing the Wireless Navigator Utility to PC.

Note!

Please make sure that your PC already has TCP/IP protocol installed. If not, please contact your administrator for details if you have problems of setting up this TCP/IP protocol in your PC.

Note!

Even your adapter is not connected with PC, but other Ethernet device, such as printer server. You still can install the Wireless Navigator in any PC located in the same IP subnet with the adapter. This utility can search the adapter via both wired and wireless Ethernet so that you still manage the adapter remotely.

Step 1: Insert the installation CD-ROM into the CD-ROM drive. Run SETUP.EXE program

on the CD-ROM. The following window will be shown automatically.

11