Network Computing Devices GW-EN11H user manual Server Tab, Admin Tab

GeoWave GW-EN11H Wireless Ethernet Adapter User's Manual

The Server Tab

IP Address Mode: Select “Static” or “DHCP” mode. For “Static” mode, the IP address settings are given by user. For “DHCP” mode, IP settings will be overridden by a DHCP server on your network. The default setting is “Static”

IP Address: The static IP address you want to assign to the adapter. The default value is “192.168.1.100”.

IP Subnet: The subnet mask you want to assign for the adapter. The default value is “255.255.255.0”.

IP Gateway: The gateway you want to assign for the adapter. The default value is “192.168.1.1”.

Allow upgrade uploads: Check the box, and then it is allowed to upgrade firmware.

Note!

You may need to reboot the adapter, and then re-load the page to see any new settings.

The Admin Tab

Change password: Default password is “admin”. For security concerns, please change it after finish the configuration.

Reboot Adapter: When any setting was changed, the adapter MUST be reboot so that the change can be confirmed.

Reset to factory defaults: This option will ERASE all the current settings, and restore to the factory default settings.

Note!

You may need to reboot the adapter, and then re-load the page to see any new settings.

21