OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Before operating this appliance, proceed through the following checklist

.

1.Read and understand these instructions before operating this appliance.

2.Check that there no leaks. If you smell gas do not attempt to light this appliance.

LIGHTING INSTRUCTIONS

MODULATING VALVE(MAXITROL)

FOR YOUR SAFETY, READ BEFORE LIGHTING

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING: Smell all around the appliance for gas. Be sure to smell next to the floor because gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

*Do not try to light any appliance.

*Do not touch any electrical switch; do not use any phone in your building.

*Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

*If you cannot reach your gas supplier, call your local fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may result in fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

22

Page 24
Image 24
New Buck Corporation 1110 manual Lighting Instructions Modulating Valvemaxitrol, For Your Safety, Read Before Lighting