New Buck Corporation 1110 manual To Turn Off Gas To Appliance, Igniter Electrode Thermo-Couple

IGNITER ELECTRODE

THERMO-COUPLE

14.Close the access panel door.

15.“Turn on all electric power to the appliance.”

O.D.S PILOT BURNER

PILOT

TO TURN OFF GAS TO APPLIANCE

SHUTTING OFF UNIT:

1.Open access panel door, located in lower front center of base for access to control knobs.

2.Set thermostat (flame control) to lowest setting.

3.Turn control knob clockwise to the full “OFF” position.

4.“Turn off all electrical power to the appliance if service is to be performed.”

5.Close access panel door.

SHUTTING OFF BURNER ONLY (pilot stays lit)

1.Open access panel door, located in lower front center of base for access to control knobs.

2.Turn control knob clockwise to the “PILOT” position.

3.Close access panel door.

24