• PIDE and SATA:
Two Enhanced PIDE interfaces for up to four devices,
support PIO Mode 3/4 or Ultra ATA33/66 /100 IDE Hard
Disk, ATAPI CD-ROM and LS-120 drive.
Two SATA connectors support up to two SATA-150 HDDs.
Two SATA ports can be configured as RAID-0 and RAID-1
with RAID BIOS and Intel IAA drivers.
SATA RAID BIOS is integrated in System BIOS.
FDD Interface:
Two floppy drives (360KB, 720KB, 1.2MB, 1.44MB,
2.88MB)
• Super I/O:
Parallel Port: One high-speed parallel port with
SPP/EPP/ECP mode support.
Serial Port: Two 16550 UART compatible ports. COM2 can
be configured as RS232 as well as RS422/RS485 interface.
IrDA Interface: Pin-header connector for the optional IrDA
external connector
• Gigabit Ethernet:
Intel 82547GI and 82541GI Gigabit Ethernet controller
on-boards.
Two LED to display the Speed, Link and Activity.
LINK/ACT Î GREEN ON: LINK
Blinking: Activity.
SPEED Î ORANGE: 1000M bps
Green: 100M bps
Off: 10M bps
Support Teaming, load balancing and fault-tolerance with
Intel Bay-City 3.0 drivers.
Support Wake-on-LAN while ATX power supply is attached.
• CMOS:
On-board RTC with 242 bytes of Battery-back CMOS RAM.
One 3-pins Jumper to clear CMOS data.
18
TR-5001 User Manual