New Transducers TR-5001

LANLED Connectors

The 4-pins LANLED connector designed for each LAN port is for

applications need to display LAN port status on front panel or the places

administrators are easy to access.

4 1

LAN LED

Pin #

Signal Name

1 ACTLED-

2 LINKLED-

3 ORGLED-

4 GRNLED-

AT Power P8 Connector

The following table describes the pin assignment of on-board AT

Power P8 connector. This connector is for the applications which do

not require a backplane. Users can connect it to an AT SPS P8

connector to supply the system power. The Power good signal will be

generated by the circuit on the SBC card. Pin 1 is replace with +5V

power to increase supply current.

Pin # Signal Name

1 +5V

2 +5V

3 +12V

4 -12V

5 GND

6 GND

TR-5001 User Manual