oAUtO – Last Target Measurement*
oPLGr – Communication to PLGR GPS*
oPC – Communication to PC*
oReticule – Change reticule from + (cross) to (rectangle)
oCAL – Compass calibration
▪CALc – compass calibration (CI model only)
▪Corr – accuracy correction of active parameters
*not shown in the menu if currently selected
Accuracy correction
If the System produces any measurement errors that lie beyond unit specification, it may be an indication that unit requires calibration similar to one conducted at production level. To do accuracy correction, please select Corr from CAL menu.
Perform correction according to required measurement parameters by pressing Action button, see table below:
16
