Newcon Optik LRB 6000CI operation manual Operation Instructions, Installing the battery

5. OPERATION INSTRUCTIONS

Installing the battery

Open the battery compartment using a suitable tool, or a coin.

Insert a 9V Lithium non-magnetic battery provided with your device

Connect the battery to the battery snap

Refit the battery compartment and tighten the screw.

If the battery compartment cover does not close tightly and evenly, check that the battery snap wires are neatly packed inside the battery compartment and the cover is aligned over the edge of the battery compartment.

Note: Battery in metal casing will diminish compass accuracy. Non-magnetic batteries should be used for the utmost compass performance.

LRB 6000CI is equipped with battery monitoring sensor. If display shows “LOW BATTERY” warning when battery voltage falls below 6.5V this indicates that the battery is used up. You can still get readings, but the battery needs to be replaced soon.

10