GAS HOOK-UP
5.When connecting regulator assembly to the valve, hand tighten the quick coupling nut clockwise to a complete stop. Do not use a wrench to tighten. Use of a wrench may damage the quick coupling nut and result in a hazardous condition.
6.Open the tank valve fully (counterclockwise). Apply the soap solution with a clean brush to all gas connections. See below. If growing bubbles appear in the solution the connections are not properly sealed. Check each fitting and tighten or repair as necessary.
7.If you have a gas connection leak you cannot repair, turn gas OFF at supply tank, disconnect fuel line from your grill and call
8.Also apply soapy solution to the tank seams. See below. If growing bubbles appear, shut tank OFF and do not use or move it! Contact an LP gas supplier or your fire department for assistance
To disconnect L.P. gas cylinder:
1.Turn the burner valves off.
2.Turn the tank valve off fully (turn clockwise to stop).
3.Detach the regulator assembly from the tank valve by turning the quick coupling nut counterclockwise.
INSTALLER FINAL CHECK LIST
9Specified clearance maintained 24”(61cm) from combustibles.
9All internal packaging removed.
9Knobs turn freely.
9Burners are tight and sitting properly on orifices.
9Pressure regulator connected and set. Gas connections to grill using hose & regulator assembly provided
9Unit tested and free of leaks.
9User informed of gas supply shut off valve location
USER, PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.
PROPANE CYLINDER CAUTIONS
a)Do Not store a spare
b)NEVER fill the cylinder beyond 80 percent full.
c)If the information in “a” and “b” is not followed exactly, a fire causing death or serious injury may occur.
