Nextar NXBT-001 MAKING A PHONE CALL Dialing with the cell phone, Voice Dialing, Hand-Holdmode

MAKING A PHONE CALL

Dialing with the cell phone

With the NXBT-001 on and paired with your cell phone, dial your cell phone as you would normally.

Voice Dialing

With the NXBT-001 on and paired with your cell phone, press the button once. After you hear the audio signal, state the desired name.

Note: Your cell phone must support Voice Dialing.

Last Call Redialing

With the NXBT-001 on and paired with your cell phone, press and hold the button for 2 seconds, the last dialed number will be redialed.

Note: Do not press the	button for more than 2 seconds as the NXBT-001
will turn off.

ANSWERING A PHONE CALL

Press the button once when the cell phone rings.

ENDING A PHONE CALL

Press the button once when the conversation has ended.

REJECTING A PHONE CALL

Press and hold the button for 2 seconds to reject an incoming call.

OPTIONS AVAILABLE DURING A CALL

TRANSFER CALL BETWEEN YOUR CELL PHONE AND THE NXBT-001

Press and hold the button for 2 seconds during your conversation. You will hear a BEEP sound and the call will transfer between your cell phone and the NXBT-001.

HAND-HOLD MODE

This device supports hand-hold mode. If you don't want to use the loudspeaker, you can turn the volume to the lowest level and use the NXBT-001 as you using your cell phone.

VOLUME CONTROL
With the NXBT-001 on and paired with your cell phone, press	or	to
adjust the volume.