27 ENG USING THE BATTERY

Recharging the battery pack

Recharging the battery pack as described below.

Connect the DC output plug of AC/DC adapter to the battery pack.

Connect the AC adapter to the power outlet.

When recharging starts, the recharge LED lights is red.

The recharge LED turns off when recharging completes. Remove the power cord from battery pack.

Recharging usually completes in about 3.5~4.5 hours.

The battery pack can be used for about 300 cycles of recharging and operations, though this is variable depending on the operating conditions.

Charge the battery pack fully before using it for the first time.

CAUTION

Place the battery pack and AC adapter on a flat surface for recharging. Do not short-circuit the terminals of the battery pack and AC adapter.

Notes:

The battery charger(AC adapter) is compatible with supply voltage between 100 V and 240 V AC and can be used universally.

When you want to use it on an overseas travel, however, be sure to prepare a power plug adapter matching the local power outlet.

MOBILE ENTERTAINMENT

Page 29
Image 29
NextBase SDV27-SD operating instructions ENG Using the Battery, Recharging the battery pack