Nextbook NEXT8P12 instruction manual Charging Battery, Installing Memory Card, Transferring Files

Left View and Right View

k		k.	Power Button – press and hold to turn on or off the device;
		l.	briefly press to turn the screen on or off.
l			Vol+/- Button – turn up/down the volume of the device.
		m.	Earphone Port – connects to stereo earphones (not provided
	m	n.	with the unit.)
			Mini USB Port – connects to a computer through the USB
	n
o		o.	cable.
			Built-in Micro phone – record your voice or speeches.
p		p.	Power-IN Port – connects to any standard electric source
			through the provided AC adaptor.

Charging Battery

The device has a built-in rechargeable battery. No extra battery installation is required. Just charge the device when it indicates low battery.

To charge the battery, connect the device to any standard wall outlet via the DC-IN port using the power adaptor. It takes about 5 hours to fully charge the battery.

Note:

a.You are strongly recommended to charge the battery immediately when the device indicates the battery is lower than 15%!

b.You can operate the device even when it is being charged. But for extended battery life, it is suggested NOT to use the device when it is charging.

c.It is recommended to charge the battery before you use the device for the first time.

d.For maximum performance, lithium-ion batteries need to be used often. If you don’t use the device often, be sure to recharge the battery at least once per month.

Installing Memory Card

This device can read files directly from memory card.

To use a memory card, find the card slot at the bottom of the device and then insert the memory card into the slot in the correct orientation. To access the files stored in the memory card, enter the Explorer mode by tapping the Explorer icon and select the “SD Card” directory.

Transferring Files

Before reading or playing files, you need to transfer media files from a computer to the device.

(1)Connect the device to a computer with the supplied USB cable.

(2)Drag from the top bar downwards to display the USB notification message as shown.

Drag downwards

6