SERVER
2.1Location of the Server
The Server must be mounted on a dry, flat and vertical surface below deck , at least 500 mm (20") from radio receiving equipment.
Locate the Server in the centre of the boat and close to the electrical panel if possible.
2.2Installing the Server
Remove the Server cover from the base plate by removing the two screws. Drill the 4 screw holes using a 2.8 mm (0.11") drill. Mount the Server using the 4 mounting screws.
Apply silicon paste on the screw terminal. Connect the 8 m Nexus Network cable labelled number 5 and supplied with cable protectors to the Server on pins 5, 6, 7, and 8. Match the colour codes for each wire.
8
