Sync/Multiple Flash Sockets | Nikon 14 guide

Sync/Multiple Flash Sockets ®

Two standard Nikon screw-type terminals are provided on the Speedlight SB-14. Either terminal can be used to connect the SB-14 to the camera, while the other is pro- vided for connecting the SB-14 with another flash unit in series for multiple flash operation. When using the Nikon Speedlight SB-ll, 12, 14 or 15 as a secondary unit, con- nect the flash units together using the Sync Cord SC-ll or SC-15. With the SB-lO or SB-7, use the Sync Cord SC- 5, SC-6 or SC -7.

Note: In multiple flash operation, make sure 10 use both flash units on manual.

19

Image 19

Nikon 14 manual Sync/Multiple Flash Sockets

Contents

Nikon Speedlight Nomenclature Page Contents Foreword Attach the bracket to Flash unit Attach the bracket @ toPlug in the sensor CD Attach the sync cord Connect the power supplyCheck the position Set the exposure calcu- -lator dial @ Set the cameras shutter speed for proper syn- chronization Turn on the power supply Set the shooting mode selector QSet the lens aperture ring to an approprIate Number When the shutter is tripped, the flash Turn off the power supplyWatch the ready-light Take the picture Controls in Detail Shutter Speed Dial Synchronization chart For Automatic Operation Exposure calculator Dial @Flash-to-subject distance Recycling time and depth of field Controls in Detail At the M Manual Position Sensor Unit SU-2At the Three Auto Positions At the S Slave Position Controls in Detail Open-Flash Button Flash Head Sync/Multiple Flash Sockets Wide-Flash Adapter SW-5 CD Fill-In Flash Photography Subjects Reflectivity Accessories Sensor Remote Cord SC-13 TTL Sensor Cord SC-12Sync Cord SC-lS ~EDEYEn Optimum Battery Performance Power source Guide number DimensionsAsaiiso 100 and meters 32 22 with Wide-Flash Weight Accessories providedPage 1IIIto