Nikon 26458, COOLPXS5300P manual 204

	Display	Cause/Solution	A
		The camera could not receive the signal from the smart
	No access.	device. Select Connect to smart device in the Wi-Fi	81,
		options menu, and establish the wireless connection	E71
		again.
		The camera failed to establish the connection while
		receiving the signals from the smart device. Set a	81,
	Could not connect.	different channel in Channel under Options in the Wi-Fi
			E71
		options menu, and establish the wireless connection
		again.
		A cable was connected to the camera while the camera
	Wi-Fi connection	and smart device were wirelessly connected, the battery	81,
		level became low, or the connection was aborted due to
	terminated.		E71
		poor connectivity. Disconnect the cable and establish
		the wireless connection again.
		A lens error occurred.
	Lens error	Turn the camera off and then on again. If the error	20
		persists, contact your retailer or Nikon-authorized service
		representative.
	Communications error	An error occurred while communicating with the printer.	E25
		Turn the camera off and reconnect the USB cable.
SectionReference		An error occurred in the camera’s internal circuitry.
	System error	Turn the camera off, remove and reinsert the battery, and	10, 20
		turn the camera on. If the error persists, contact your
		retailer or Nikon-authorized service representative.

E92