Nikon 26458, COOLPXS5300P Auto, Close-up, Movie VR, AF assist, Shooting Issues

Shooting Issues

	Problem		Cause/Solution	A
	Cannot switch to shooting			83, 86,
		Disconnect the HDMI cable or USB cable.		E22,
	mode.
				E25
		• When the camera is in playback mode, press the		1, 28
			Abutton, shutter-release button, or b(e
	No image captured when		movie-record) button.
	the shutter-release button is	•	When menus are displayed, press the dbutton.	4
	pressed.	•	The battery is exhausted.	20
		• When the flash lamp is flashing, the flash is		47
			charging.
		• The subject is too close. Try shooting using scene		32, 36, 51
			auto selector mode, Close-upscene mode, or
	The camera cannot focus.		macro mode.
		• The subject is hard to focus on.		64
		• Set AF assist in the setup menu to Auto.		78, E81
		• Turn the camera off and then on again.		20
		•	Use the flash.	47
		• Increase the ISO sensitivity value.		56
		• Enable Photo VR and/or Motion detection when		74, 77
Technical			shooting still images. Enable Movie VR when
	Images are blurred.		recording movies.
		• Use D(Best Shot Selector).		37, 56,
		• Use a tripod to stabilize the camera when shooting		E39
Notes				49
			(using the self-timer at the same time is more
Index and			effective).

F10