Nikon 26458, COOLPXS5300P manual 216

	Problem	Cause/Solution	A
	The camera cannot be	The battery is exhausted.	20
	turned on.
		• The camera automatically turns off to save power	21
		(auto off function).
		• The camera and battery may not work properly at	F3
		low temperatures.
	The camera turns off	• The inside of the camera has become hot. Leave	–
	without warning.	the camera off until the inside of the camera has
		cooled, and then try turning it on again.
		• The camera turns off if the USB cable connecting it	83, 86,
		to a computer or printer is disconnected.	E25
		Reconnect the USB cable.
		• The camera is off.	20
		• The camera has entered standby mode to save	1, 21
		power. Press the power switch, shutter-release
		button, Abutton, cbutton, or b(emovie-
		record) button.
	Monitor is blank.	• The flash lamp flashes while the flash is charging.	47
		Wait for the flash to charge.
		• The camera and computer are connected via the	83, 86
		USB cable.
		• The camera and TV are connected via an HDMI	83, E22
IndexandNotesTechnical		cable.
	Monitor is hard to read.	• Adjust the monitor brightness.	77, E76
		• The monitor is dirty. Clean the monitor.	F6

F8