Nikon 3500 manual Beyond Point-and-Shoot, Or Movie Choosing a Shooting Mode, Camera Controls

Beyond Point-and-Shoot

Camera Controls

Taking Pictures— Beyond Point -and -Shoot

,, or Movie: Choosing a Shooting Mode

In mode, you have a choice of four basic shooting modes (for information on choosing a shooting mode, see “Tutorial: Taking Pic- tures”;23):

Auto produces good results in a wide range of situations. Use for snapshots or when you want control over image quality ( Auto 51), image size ( 52), and exposure compensation ( 53) while

leaving the camera in charge of other settings.

Choose this mode for complete control over all camera settings, including white balance ( 54), sharpening ( 58), and BSS ( Manual 57). You can also choose to take pictures in continuous sequence

while the shutter-release button is held down ( 56).

This mode is used to record silent movies 320 ⋅ 240 pixels in size (QVGA) at a rate of about fifteen frames per second. Recording begins when the shutter-release button is pressed all the way down and ends when the shutter-release button is fully pressed a second time.

•In place of the number of exposures remaining, the exposure- count display in monitor shows the length of the movie that can be recorded.

Movie •Movie ends automatically after 35 seconds or when no more space is available on the memory card.

•Movies are stored as QuickTime movie files ending in “.MOV”. •The flash turns off ( ) automatically.

•Menus and scene-selection are disabled in movie mode

•If the lens is rotated to point in the same direction as the mon- itor during recording, the display in the monitor will be inverted and the movie will be recorded upside down.

Pressing the SCENE button in or mode displays a menu of twelve “scenes,” where you can choose an option suited to your subject and com- position and let the camera adjust settings for best results. For more infor- mation, see “Tutorial: Getting Creative” ( 36).

42