Nikon Camera Lens LENS CARE

62mm snap-on front lens cap

Rear lens cap LF-1

Hand lens case CL-33S

Plastic case CP-9

Screw-in hood HN-22

62mm screw-in filters

Teleconverter TC-200

Teleconverter TC-201

Teleconverter TC-14A

Soft lens case No, 62

LENS CARE

• Althouogh you should always keep the lens surfaces clean, rough cleaning

must be avoided. Wipe with a soft, clean cotton cloth moistened with alcohol to

remove grease or fingerprints from the lens surfaces.

If you use ether in cleaning the lens, a smudge sometimes appears on the

surface of a multi-coated lens. If this happens, wipe it again with a cotton cloth

moistened with alcohol.

• To protect the lens surface from dirt or damage, the use of an L37C or L1BC

filter is recommended at all times. The lens hood also helps to protect the lens.

• Keep the lens cap in place whenever the lens is not in use.

• Attach both the front and rear caps when the lens is stored separately.

• To ensure proper fit of the lens when stored in the leather lens case, set the

lens'

focusing ring to the infinity (*>) setting.