Scene Assist Modes
1 Press the multi selector G or H to choose
• The K guide is displayed.
2 Frame a picture using the K guide.
• When the camera detects a face, the guide is dis-
played with a double yellow border.
• When the camera detects more than one face, the
closest face is framed by a double border and the rest by a single border. The camera focuses on the
face framed by the double border. If the camera
loses its ability to detect a face (for example, because the subject has looked away from the camera), borders are no longer displayed and monitor display returns to that shown in step 1.
3 Press the
• Focus and exposure are set, and the double border turns green.
4 Press the
j
•The camera’s ability to detect faces depends on a variety of factors, including whether or not the subject is facing the camera.
•The camera will focus continuously until a face detected.
•If the yellow double border blinks when the
•If no face is recognized when the
•The camera may be unable to detect faces in the following situations;
-When faces are partially hidden by sunglasses or other obstructions
-When faces take up too much or too little of the frame
Mode Scene b Mode: Scene Selecting
31