PictBridge
Turn the camera on.
• The PictBridge start-up screen ( ) will be displayed in the camera monitor. The camera will then enter full-frame playback with the PictBridge logo dis- played in the top left corner of the monitor ( ).
Connecting to a Printer
Connecting the Camera and Printer
1 | Set the USB option (c 63) to [PTP]. | USB |
|
| PTP |
|
| Mass storage |
|
| MENU Exit |
2 | Turn the camera off. |
|
3 | Turn the printer on. |
|
| • Check printer settings. |
|
4 | Connect the USB cable as shown below. |
|
Printers and Computers, Televisions, to Connecting
5
OK : 
4/ 4
jConnecting the USB Cable
•When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an angle.
•Do not pinch the connector cover between the camera’s USB connector and the USB cable
connector when connecting the cable to the camera. | 67 |
|